 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| High-Intensity Orange LED in Plastic T-13/4 Package OVLGO0CxB9 x x x x Narrow Beam Angle High Luminous Intensity Water Clear Plastic Package Orange (615nm) Product Photo Here The OVLGO0CxB9 is a high intensity AlInGaP LED mounted in a clear plastic T-13/4 package. The device incorporates an integral molded lens that enables a narrow beam angle and provides an even emission pattern. Designed to produce light over a wide range of drive currents, this LED is useful in applications requiring higher on-axis brightness than that achievable with standard lamps. Applications x Indoor/Outdoor Applications x Message Boards x Store Front Signage x Indicators Part Number OVLGO0C6B9 OVLGO0C7B9 OVLGO0C8B9 Material AlInGaP Emitted Color Orange Intensity Typ. mcd 10000 12500 16000 Lens Color Water Clear RoHS 1 ANODE 2 CATHODE OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0505 Page 1 T-13/4 High-Intensity Orange LED OVLGO0CxB9 Absolute Maximum Ratings TA = 25oC unless otherwise noted Storage Temperature Range Operating Temperature Range Reverse Voltage Continuous Forward Current Power Dissipation Lead Soldering Temperature (3mm from the base of the epoxy bulb) Electrostatic Discharge Note: 1. Solder time less than 5 seconds at temperature extreme. 1 2 -40 ~ +100 C -40 ~ +85 C 5V 50 mA 100 mA 120 mW 260 C 2000 V Peak Forward Current (10% Duty Cycle, 1KHz) Electrical Characteristics TA = 25oC unless otherwise noted SYMBOL PARAMETER x=6 Iv Luminous Intensity 7 8 VF IR P D MIN 6300 8000 10000 ---------------- TYP 10000 12500 16000 2.0 ---621 615 6 MAX ---------2.4 10 ---------- UNITS CONDITIONS mcd V A nm nm deg IF = 20mA Forward Voltage Reverse Current Peak Wavelength Dominant Wavelength 50% Power Angle IF = 20mA VR = 5V IF = 20mA IF = 20mA IF = 20mA 2 1/2H-H Issue 1.0 Page 2 0505 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com T-13/4 High-Intensity Orange LED OVLGO0CxB9 Typical Electro-Optical Characteristics Curves Half Power WL = 18nm mA % V Forward Current vs. Forward Voltage Relative Luminous Intensity vs. Wavelength mA % % mA C Relative Luminous Intensity vs. Forward Current Relative Luminous Intensity vs. Ambient Temperature mA % Forward Current vs. Ambient Temperature C Relative Intensity vs. Radiation Angle OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0505 Page 3 T-13/4 High-Intensity Orange LED OVLGO0CxB9 Issue Change Description Approval Date 1.0 Initial Release J. Haynie 6/7/05 Issue 1.0 Page 4 0505 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com |
Price & Availability of OVLGO0C6B9
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |